Cabletron Systems SPECTRUM 1800 User Manual page 128

Portable management application for the frx4000, frx6000, and smartswitch 1800
Hide thumbs Also See for SPECTRUM 1800:
Table of Contents

Advertisement

SNA Status and Configuration
Possible line speed entries are:
If you enter a value that is within the valid range but not equal to one of the
values listed above, the speed will be rounded up. If an RS-232 DCE port is
directly connected to the DTE via the standard Cabletron cable, the maximum
supported speed is 64000. If longer cabling is used, the maximum speed is 19200.
MAX Retries
This is the maximum number of times the port will attempt to send a frame if the
physical unit (PU) is not responding. A larger value increases the probability of an
eventual correct transfer between DTE and DCE, but a smaller value permits
faster detection of a permanent error condition. The default value for this
parameter is 5.
Inactivity Timer
This parameter is only relevant if PAD Type (see below) is HPAD. It is the amount
of time (in seconds) that the FRX will wait with no activity on the port before it
declares the port is down. The default value for this parameter is 50.
Physical Port Interface
The physical port interface is deÞned by the portÕs connector and cabling type,
and must be conÞgured as follows:
¥
If you have installed the optional CSU/DSU card on an FRX4000 or SmartSwitch 1800,
it will logically take port 1, and you must conÞgure certain CSU/DSU parameters
NOTE
through console management. Refer to your FRX or SmartSwitch 1800 hardware
documentation for more information.
¥
7-4
75
150
300
112000
600
128000
1200
168000
2400
192000
4800
224000
9600
256000
14400
280000
19200
320000
24000
336000
28800
384000
38400
392000
48000
448000
56000
504000
For the FRX4000 and SmartSwitch 1800, port 0 and port 1 are always RS-232;
For the FRX4000, ports 2 and 3 are determined by the attached cables: RS-232,
V.35, RS-449, or X.21;
64000
512000
72000
560000
576000
616000
640000
672000
704000
728000
768000
784000
832000
840000
896000
952000
960000
1008000
1472000
1024000
1512000
1064000
1536000
1088000
1568000
1120000
1600000
1152000
1624000
1176000
1664000
1216000
1668000
1232000
1728000
1280000
1792000
1288000
1856000
1344000
1920000
1400000
1984000
1408000
2048000
1456000
Configuring SNA Ports

Advertisement

Table of Contents
loading

This manual is also suitable for:

Spectrum frx4000Spectrum frx6000Spectrum

Table of Contents

Save PDF