Adding Or Modifying Ipx Interfaces - Cabletron Systems SPECTRUM 1800 User Manual

RIP Max Size
This is the maximum RIP packet size (in bytes), including the IPX header (30
bytes) and the LAN MAC header (if transmitted on a LAN interface). The default
value for this parameter is 446.
Max VC
This parameter is only conÞgurable if you have selected X.25 as your Interface
Type. It speciÞes the maximum number of virtual circuits over which IPX trafÞc
will be transmitted in parallel. The default value for this parameter is 1.

Adding or Modifying IPX Interfaces

First, access the IPX Interface ConÞguration window (see
Interfaces,
To add a new IPX interface:
1. Enter the IPX Interface Number, the IPX Interface Type, and the other
2. Click on
To modify an existing entry:
1. In the list box, click to select the IPX Interface you wish to modify. The
2. Edit the fields, as desired. If you would like to return to the original values,
3. Click on
To delete an existing entry:
1. In the list box, click to select the IPX Interface you wish to delete. The selected
2. Click on
After you have made system-level changes (such as conÞguring an IPX Interface), you
must apply those changes by rebooting the FRX or SmartSwitch 1800 device, or through
NOTE
console management via the [F7] command.
Configuring IPX Interfaces
page 10-2).
configurable values for each interface.
to add your new entry.
selected entry will be highlighted. (Note that you can only modify one entry at
a time.)
click on the Refresh button.
to modify the selected entry.
entry will be highlighted. (Note that you can only delete one entry at a time.)
to delete the selected entry.
IPX Interface Configuration
ConÞguring IPX
10-9