Ipx Static Route Conþguration - Cabletron Systems SPECTRUM 1800 User Manual

IPX Interface Configuration
To modify an existing entry:
1. In the list box, click to select the Static SAP Route you wish to modify. The
2. Edit the fields, as desired. If you would like to return to the original values,
3. Click on
To delete an existing entry:
1. In the list box, click to select the Static SAP Route you wish to delete. The
2. Click on
After you have made system-level changes (such as conÞguring an IPX Interface), you
must apply those changes by rebooting the FRX or SmartSwitch 1800 device, or through
NOTE
console management via the [F7] command.
IPX Static Route Configuration
To access the IPX Static Route ConÞguration window:
1. Click on the
2. Drag down to IPX Static Route Configuration, and release. The IPX Static
10-12
selected entry will be highlighted. (Note that you can only modify one entry at
a time.)
click on the Refresh button.
to modify the selected entry.
selected entry will be highlighted. (Note that you can only delete one entry at
a time.)
to delete the selected entry.
Route Configuration window,
button to display the Device menu.
Figure 10-4, will appear.
Configuring IPX Static Routes