FCS Rej/Sec exceeded T: "n" C: "n"
The port statistic FCS Errors/Sec has exceeded the threshold (T: ÒnÓ) that was set
by the user. (C: ÒnÓ is the current value.) A value consistently greater than zero
indicates line problems.
Severity
Action
Log Rej/Sec exceeded T: "n" C: "n"
The port statistic Logical Rejects/Sec has exceeded the threshold (T: ÒnÓ) that was
set by the user. (C: ÒnÓ is the current value.) A value consistently greater than zero
indicates line problems.
Severity
Action
Trn Err Ratio exceeded T: "n" C: "n"
The port statistic Transmit Error Ratio has exceeded the threshold (T: ÒnÓ) that
was set by the user. (C: ÒnÓ is the current value.)
Severity
Action
Rcv Err Ratio exceeded T: "n" C: "n"
The port statistic Receive Error Ratio has exceeded the threshold (T: ÒnÓ) that was
set by the user. (C: ÒnÓ is the current value.)
Severity
Action
Rcv Port Usage exceeded T: "n" C: "n"
The port statistic % Receive Port Utilization has exceeded the threshold (T: ÒnÓ)
that was set by the user. (C: ÒnÓ is the current value.)
Severity
Action
Trap Messages
Informational (Level 4)
If this happens frequently, check the line for noise, and check for
conÞguration errors on both the FRX port and the connected user
device.
Informational (Level 4)
If this happens frequently, check the line for noise, and check for
conÞguration errors on both the FRX port and the connected user
device.
Informational (Level 4)
If this happens frequently, check the line for noise, and check for
conÞguration errors on both the FRX port and the connected user
device.
Informational (Level 4)
If this happens frequently, check the line for noise, and check for
conÞguration errors on both the FRX port and the connected user
device.
Informational (Level 4)
If this happens frequently, you may need to add ports or reroute
some trafÞc.
Configuring the Trap Table
314
315
316
317
318
3-7