Bsci Subscriber Id Information - Cabletron Systems SPECTRUM 1800 User Manual

BSCI Subscriber ID Information

The BSCI Subscriber Information window provides information on local and
remote subscribers for each BSCI port.
A local TPAD subscriber can specify only one remote device, which can be an
HPAD or an X.25 connection to the host. A local HPAD subscriber can specify up
to 16 remote devices, any of which can be a TPAD or an X.25 connection to the
host. Each connection must be assigned a different local subscriber address.
You must also conÞgure BSCI Device Information for each remote BSC device (see
ConÞguring BSCI
NOTE
Use the BSCI Subscriber Information window to conÞgure the subscriber
addresses for each of your BSCI ports. To access the window:
1. Click mouse button 3 on the BSCI port of interest to display the Port Menu.
2. Drag down to BSCI Port Subscriber Configuration, and release. The BSCI
BSCI Subscriber ID Information
Devices,
Subscriber Information window,
Figure 8-2. BSCI Subscriber Information
page 8-9).
Figure 8-2, will appear.
BSC Interactive Configuration
8-7