Sdlc Port Conþguration - Cabletron Systems SPECTRUM 1800 User Manual

SNA Status and Configuration
Figure 7-1. SDLC Port ConÞguration
The SDLC Port ConÞguration window provides the following information:
Packet Size
This Þeld speciÞes the maximum packet size (in bytes) that will be transmitted on
the port. The default value for this parameter is 1024.
Line Speed
This Þeld speciÞes the data transmission rate in bits per second. If this port is a
physical DTE, specify the line speed that matches the speed of the device
connected directly to the port. If the port is a physical DCE (i.e., the attached I/O
cable is DCE) specify the clock speed of the serial port you are conÞguring.
Configuring SNA Ports 7-3