Cabletron Systems SPECTRUM 1800 User Manual page 63

LG Buffer MALLOC Problem PKTs Lost
This applies to a debug tool used by service personnel, and will not appear under
normal operation.
Severity
RCV Unknown Event Code from Net.
An unknown event was received from the network.
Severity
RCV Invalid Event Format from Net.
The node has received an event with an invalid format.
Severity
DOS Error Handler Exceeded Limit
The FRX was performing a DOS operation and, for some reason, could not reach
DOS.
Severity
Action
Database Error, Access Restricted
The database is inconsistent with what the software expects.
Severity
Action
Abrev Addr File Upd: ABVSUB.DAT
The Abbreviated Address Þle has been updated.
Severity
Async Init File Upd: ASYSETUP.DAT
The Async Console Þle has been updated.
Severity
BSC Device File Upd: BSCDSP.DAT
The BSC Interactive Devices Þle has been updated.
Severity
LP Config File Upd: LPTYPE.DAT
The Line Processor conÞguration Þle has been updated.
Severity
Trap Messages
Major (Level 2)
Major (Level 2)
Informational (Level 4)
Major (Level 2)
Reboot the node and watch for error messages during boot-up. If
the problem persists, contact your service representative.
Critical (Level 1)
Contact your service representative.
Informational (Level 4)
Informational (Level 4)
Informational (Level 4)
Informational (Level 4)
Configuring the Trap Table
435
436
437
438
439
440
441
442
443
3-13