Table of Contents
Advertisement
3. Click on
After you have made system-level changes (such as conÞguring Frame Relay Backup
Groups), you must apply those changes by rebooting the FRX or SmartSwitch 1800
NOTE
device, or through console management via the [F7] command.
Configuring Logical Ports
A frame relay port can contain multiple logical ports, allowing multiple protocols
to run over a single physical frame relay port. You can conÞgure up to 56 logical
ports in an FRX4000 or SmartSwitch 1800, and up to 56 logical ports per RLP in an
FRX6000. All 56 logical ports can reside on one physical port, or be spread over
several physical ports.
Before conÞguring a logical port, make sure the physical frame relay port on which the
logical port will reside has been conÞgured. Refer to
NOTE
page
Using the Logical Port ConÞguration window, you can conÞgure some basic
operational parameters for each of your logical ports.
To access the window:
1. Click mouse button 3 on the frame relay port of interest to display the Port
2. Drag down to Logical Port Configuration, and release. The Logical Port
Configuring Logical Ports
to create a new entry, or on
currently selected in the list box.
5-2.
Menu.
Configuration window,
Frame Relay Status and Configuration
ConÞguring Frame Relay
Figure
5-4, will appear.
to edit the entry
Ports,
5-15
Advertisement
Table of Contents
