Cabletron Systems SPECTRUM 1800 User Manual page 204

Bridge Configuration
To delete an existing entry:
1. In the list box, click to select the LAN Interface you wish to delete. The
2. Click on
After you have made system-level changes (such as conÞguring a Bridge Interface), you
must apply those changes by rebooting the FRX or SmartSwitch 1800 device, or through
NOTE
console management via the [F7] command.
11-10
selected entry will be highlighted. (Note that you can only delete one entry at
a time.)
to delete the selected entry.
Configuring Bridge Ports