Cabletron Systems SPECTRUM 1800 User Manual page 193

IPX Interface Configuration
Figure 10-4. The IPX Static Route ConÞguration Window
The list box at the top of the window displays the IPX static routes that have
already been conÞgured; the Þelds and buttons in the lower portion of the
window allow you to add new entries, and modify or delete existing ones.
Following is a description of the IPX Static Route parameters that you can
conÞgure:
Circuit Index
This number is the unique identiÞer of the circuit used to reach the Þrst hop in the
static route.
Network Number
Enter the IPX network number of the routeÕs destination.
Router Address
Enter the hex value of the node address of the router that will forward a packet
when this route is used. If NovellÕs IPXWAN protocol is used on the interface (as
conÞgured in the IPX Interface ConÞguration window; see page 10-2), this Þeld is
ignored.
Configuring IPX Static Routes 10-13