Enabling/Disabling Ip Fragmentation - Cabletron Systems 2E48-27R User Manual

Chapter 5: Local Management

5.7.12 Enabling/Disabling IP Fragmentation

To enable or disable IP Fragmentation, proceed as follows:
If the 2E4X-27R is being bridged to an FDDI ring (for example,
!
via an optional HSIM-F6), IP Fragmentation should be enabled.
CAUTION
If it is disabled, all FDDI frames that exceed the maximum
Ethernet frame size are discarded.
1. Use the arrow keys to highlight the IP Fragmentation field.
2. Press the SPACE bar to choose either ENABLED or DISABLED.
3. Use the arrow keys to highlight the SAVE command.
4. Press ENTER. The message "SAVED OK" displays at the top of the
screen.
5-32 2E48-27R/2E49-27R User's Guide