Displaying The Source And Destination Entries - Cabletron Systems 2E48-27R User Manual

Chapter 5: Local Management
Destination Port [ n ] (Selectable)
Allows a selected port [n] to be changed to a destination port. For details,
refer to Section 5.17.2.
Errors (Toggle)
Allows the user to configure the source ports to either ON to send errored
frames to selected destination ports, or OFF to drop errored frames, and
send only valid traffic to the destination ports. The default setting of this
field is ON.
Status (Toggle)
Allows the addition or deletion of source and destination ports selected in
the Source Port [n] and Destination Port [n] fields.

5.17.1 Displaying the Source and Destination Entries

There can be more than one Port Redirect Function screen depending on
the number of port redirect entries. Each screen displays up to 10 port
redirect entries. If there is more than one screen of redirect entries, the
NEXT and/or PREVIOUS command displays at the bottom of the screen,
allowing the user to navigate to either the next or previous screen.
For example, with three screens of entries, the NEXT command displays
at the bottom of the first screen. In the second screen, the NEXT and
PREVIOUS commands display. In the last screen, only the PREVIOUS
command displays.
To display the next screen, use the arrow keys to highlight NEXT. Press
ENTER and the next screen of entries displays.
To display the previous screen, use the arrow keys to highlight
PREVIOUS. Press ENTER to view the entries on the previous screen.
5-62 2E48-27R/2E49-27R User's Guide