Changing Source And Destination Ports - Cabletron Systems SmartSwitch 6E122 Supplement Manual

Chapter 1: Changes to Local Management Screens
Frame Format (Selectable)
Used to select the frame format for the transmission of redirected frames
on the destination port. NORMAL, TAGGED, or UNTAGGED may be
selected. Refer to the previously described read-only Frame Format field
for details about each format. The default setting is NORMAL.
Remap Errors (Toggle)
Used to set each source port to either ON, to send errored frames to its
destination port, or OFF to drop errored frames, and send only valid
traffic to its destination port. The default setting is OFF.
Status (Toggle)
Used to add or delete source and destination ports selected in the Source
Port [n] and Destination Port [n] fields.
1.5.1

Changing Source and Destination Ports

To add or delete source port and destination port entries and set the Frame
Format and Redirect Errors functions, proceed as follows:
1. Use the arrow keys to highlight the Src Port field near the bottom of
the screen.
2. Press the SPACE bar or BACKSPACE one or more times to increment
or decrement the port number displayed in the brackets [n] until the
appropriate port number displays.
3. Use the arrow keys to highlight the Src Module field near the bottom
of the screen.
4. Use the SPACE bar or BACKSPACE to step to the appropriate
module number for the source module.
5. Use the arrow keys to highlight the Dest Port field near the bottom of
the screen.
6. Press the SPACE bar or BACKSPACE one or more times to increment
or decrement the port number displayed in the brackets [n] until the
appropriate port number displays.
7. Use the arrow keys to highlight the Dest Module field near the bottom
of the screen.
8. Use the SPACE bar or BACKSPACE to step to the appropriate
module number for the destination module.
1-12 Local Management Supplement