Table of Contents
Advertisement
GSM-204-423
Configuration
for omni 4
Figure 3-17 shows a suggested configuration, using a single Horizon macro
cabinet, for omni 4 with dual stage duplexed combining filter and hybrid
combining unit.
Configuration
for omni 5 or 6
Figure 3-18 shows a suggested configuration, using one Horizon macro cabinet,
for omni 5 or 6 with dual stage duplexed combining filter and air combining.
Unused SMA connectors must be fitted with 50 ohm terminating loads as shown
below.
31st Oct 01
Figure 3-17 Single cabinet omni 4 with DDF and HCU
Figure 3-18 Single cabinet omni 5 or 6 with DDF and air combining
If configured for...
omni 5
omni 3
(depopulated omni 6)
Installation & Configuration: Horizon macro outdoor
68P02902W03-A
CONTROLLED INTRODUCTION
Suggested RF configurations
Then 50 ohm load required on
unused SMA input to...
DDF 2
all Tx modules from
radio slots 1, 3, and 5
Inst. 3–43
Advertisement
Table of Contents
