Table of Contents
Advertisement
GSM-204-423
Connecting the internal batteries
Introduction to
connecting the
internal
batteries
The Horizon macro outdoor cabinet is delivered with the internal batteries
disconnected (for safety reasons).
Internal battery
connection
procedure
To connect the internal batteries (refer to Figure 3-4):
1.
2.
3.
4.
5.
31st Oct 01
CAUTION
The batteries must be reconnected before external ac
power is connected to the cabinet.
Ensure battery circuit breaker is set to off.
Undo the two battery tray retaining screws and pull the tray forward until
the two battery cables and the battery sense lead (4-way Molex
connector) can be accessed.
Remove the heatshrink sleeves from the battery cable terminations.
Connect the blue cable to the bottom breaker terminal and the black cable
to the front (red) positive terminal.
Ensure the four battery sense leads are connected as shown in Figure 3-4
and plug the black Molex 4-way connector into its socket on the battery
retaining strap.
Push the tray back into the cage and tighten the retaining screws.
Installation & Configuration: Horizon macro outdoor
68P02902W03-A
CONTROLLED INTRODUCTION
Connecting the internal batteries
Inst. 3–17
Advertisement
Table of Contents
