Table of Contents
Advertisement
Visiting the site
Arriving at
unoccupied
sites
When entering an unoccupied site:
1.
2.
3.
4.
Leaving site
during
installation and
optimization
When leaving a site:
1.
2.
3.
Rubbish
removal
Clear rubbish from the site on completion of the job, unless otherwise indicated
by the customer.
Inst. 2–10
Do not enter the site until contact has been made with the OMC-R or
MSC. Contact the local OMC-R and local MSC to announce the team's
arrival before entering the site.
Enter the site and check for site alarms, for example intruder alarms, that
may have been activated by entry.
Advise the local OMC-R or MSC that the team is on site and indicate the
expected duration of time on site.
Arrange with the OMC-R or MSC to check the E1/T1 links as soon as
possible.
Contact the local OMC-R or MSC to announce the team's departure.
Out of hours, if an alarm is fitted and the local MSC staff have gone home,
contact the Network Control Centre or OMC-R and inform them of the
team's departure.
Sign out of the site as necessary.
WARNING
Do not burn rubbish, as packaging might give off toxic
gases.
Installation & Configuration: Horizon macro outdoor
68P02902W03-A
CONTROLLED INTRODUCTION
GSM-204-423
31st Oct 01
Advertisement
Table of Contents
