Motorola Horizonmacro outdoor Installation/Configuration Manual page 43

Table of Contents

Advertisement

GSM-204-423
Rural sites
It is the responsibility of the senior member of the team to ensure that all
personnel on site are aware of the country code and, especially with respect to
water authority sites, any relevant health regulations.
Adhere to these points of the Country Code:
S
S
S
S
S
On site safety
All personnel must:
S
S
S
S
S
Stop any work that you are supervising should any person in your team not be
properly protected, or be unaware of safety requirements.
When installing cable ties, even temporarily, cut the excess or tail properly. This
is to prevent sharp edges inflicting injury when not cut flush with the locking
edge.
31st Oct 01
Guard against all risk of fire.
Fasten all gates (remember site visits could be traced back if a complaint
is made).
Leave no litter.
Drive carefully on country roads and observe speed restrictions at all
times.
Keep to the paths/tracks across farm land.
Ensure that under no circumstances should anyone move cabinets without
assistance. Cabinets must be safely positioned at all times.
Wear supplied safety helmets when antenna or overhead work is in
progress, and when local regulations require them.
Wear supplied safety goggles and dust masks when drilling. This is
particularly important when drilling overhead ironwork.
Wear supplied ear protectors while drilling is in progress.
Wear approved safety footwear when moving heavy equipment.
Installation & Configuration: Horizon macro outdoor
68P02902W03-A
CONTROLLED INTRODUCTION
Visiting the site
Inst. 2–11

Advertisement

Table of Contents
loading

Table of Contents