Table of Contents
Advertisement
Introduction to installation and configuration
Safety
instructions
The following safety instructions must be observed when installing the
equipment described in this manual:
S
S
S
S
Software
requirements
The GSM/EGSM900 and DCS1800 BTSs require BSS and OMC-R software
release GSR4 (or later) in the network.
The GSM850 and PCS1900 BTSs require BSS and OMC-R software release
GSR5.1 (or later) in the network.
Inst. 1–2
WARNING
This equipment must only be installed by trained
personnel.
The installation and configuration procedures described in this manual
must only be carried out by suitably trained personnel.
Installation and commissioning must comply with all relevant national and
regional regulations.
The equipment must only be installed in a location to which unauthorized
access can be prevented.
Cabinets must be bolted down.
Installation & Configuration: Horizon macro outdoor
68P02902W03-A
CONTROLLED INTRODUCTION
GSM-204-423
31st Oct 01
Advertisement
Table of Contents
