Table of Contents
Advertisement
Suggested RF configurations
Configuration
for sector 5/5/5
or 6/6/6
Figure 3-31 shows a suggested configuration, using three Horizon macro
cabinets, for sector 5/5/5 or sector 6/6/6 with dual stage duplexed combining
filter and air combining.
Unused SMA connectors must be fitted with 50 ohm terminating loads as shown
below.
Inst. 3–54
CABINET 2
Figure 3-31 Sector 5/5/5 or sector 6/6/6 with DDF and air combining
If configured for...
sector 5/5/5
3/3/3 (depopulated 6/6/6)
Installation & Configuration: Horizon macro outdoor
68P02902W03-A
CONTROLLED INTRODUCTION
CABINET 3
CABINET 1
(master)
Then 50 ohm load required on
unused SMA input to...
all DDF 2 modules
all Tx modules from
radio slots 1, 3, and 5
GSM-204-423
31st Oct 01
Advertisement
Table of Contents
