Table of Contents
Advertisement
GSM-204-423
Introduction to decommissioning the Horizon macro outdoor
cabinet
Overview
This chapter describes how to decommission the Horizon macro outdoor cabinet.
To decommission equipment not supplied by Motorola, for example E1/T1 links,
power supplies and antennas, refer to the vendor's instructions.
Prerequisite
Read all the earlier chapters of this installation section, before attempting to
decommission a Horizon macro outdoor cabinet.
Lifting cabinets
Horizon macro outdoor cabinets are fitted with four lifting points, designed to
accommodate M16 swivel head eyebolts, built into the cabinet sides. If swivel
head eyebolts are used to lift the cabinet, they must be manufactured to CE
conformity, and must have a safe weight load of 400 kg each.
Refer to Safety considerations from Unpacking and preparing the cabinet in
Chapter 3 of this category before lifting cabinets.
1.
2.
3.
For continued use of eyebolts, there may be local regulations that govern the
use of lifting equipment and stipulate a test and/or examination regime. If the
eyebolts are to be used, ensure that all such regulations are met.
Remember to remove the eyebolts and refit the plastic inserts when the lifting
operation is complete.
31st Oct 01
Introduction to decommissioning the Horizonmacro outdoor cabinet
WARNING
Hazardous voltages exist inside the Horizon macro outdoor
cabinet.
Use extreme caution when working on a cabinet with
power applied. Remove all rings, watches and other
jewellery.
Carefully remove the plastic insert from the M16 threaded lifting point.
Insert the eyebolt into the thread, ensuring that no cross-threading occurs.
WARNING
Before attempting to insert the eyebolts, visually check
each one for damage. If any damage is apparent, DO
NOT USE.
Do not overtighten the eyebolts; hand tight is sufficient. Do
not tighten eyebolts with a t-bar or spanner. Screw the
eyebolt fully into the lifting point so that no thread is left
exposed.
Repeat the procedure until all four eyebolts have been correctly fitted.
Installation & Configuration: Horizon macro outdoor
68P02902W03-A
CONTROLLED INTRODUCTION
Inst. 8–1
Advertisement
Table of Contents
