Table of Contents
Advertisement
Suggested RF configurations
Configuration
for single
cabinet sector
1/1/1, 1/1/2, 1/2/2
or 2/2/2
Figure 3-25 shows a suggested configuration, using a single Horizon macro
cabinet, for sector 1/1/1, 1/1/2, 1/2/2 or 2/2/2 with duplexed combining
bandpass filter.
Unused SMA connectors must be fitted with 50 ohm terminating loads as shown
below.
Inst. 3–48
Figure 3-25 Single cabinet sector 1/1/1, 1/1/2, 1/2/2 or 2/2/2 with DCF
If configured for...
Sector 1/1/1
Sector 1/1/2
Sector 1/2/2
Installation & Configuration: Horizon macro outdoor
68P02902W03-A
CONTROLLED INTRODUCTION
Then 50 ohm load required on
unused SMA input to...
DCF 0, 1 and 2
DCF 1 and 2
DCF 2
GSM-204-423
31st Oct 01
Advertisement
Table of Contents
