Table of Contents
Advertisement
Commissioning overview
Test equipment
Table 7-1 provides details of the test equipment required to perform the
commissioning procedures in this chapter.
Inst. 7–2
Table 7-1 Test equipment required for commissioning
Quantity
Description
1
IBM compatible portable
Personal Computer (PC) (486
DX2 or DX4 minimum)
1
Commercial terminal emulator
software
1
Digital multimeter (must be
sensitive enough to measure
0.05 ohms)
1
ESD protection kit
1
9-way male D-type to 9-way
female D-type
1
PAT tester
Installation & Configuration: Horizon macro outdoor
68P02902W03-A
CONTROLLED INTRODUCTION
GSM-204-423
Comments
The basic requirements are:
TFT colour screen.
170 Mbyte hard drive
(minimum).
Minimum 4 Mbyte RAM (8 Mbyte
recommended).
3.5 inch floppy drive.
Serial port.
CD-ROM drive (recommended)
PCMCIA (Type 2) compatible
slot.
Windows 3.1 loaded and
running in 386 enhanced mode.
Battery power.
PC PLUS or similar software
(suitable for PC being used)
Hewlett Packard E2378A or
equivalent.
For PC to MCUF.
Pin connections shown in
Figure 7-1.
Insulation and earth tester.
31st Oct 01
Advertisement
Table of Contents
