Table of Contents
Advertisement
GSM-204-423
Outdoor site with auxiliary equipment housing
Figure 2-2 shows the site layout plan for a single cabinet and optional auxiliary
equipment housing with dimensions and required clearances.
Figure 2-2 Outdoor cabinet site layout plan view (including optional equipment)
View of
maximum site
template layout
Figure 2-3 shows a plan view of the template layout for the maximum site
configuration. Using the dimensions and clearances shown, the site layout for
any combination of BTS cabinets and auxiliary equipment housings can be
calculated.
31st Oct 01
1000 mm recommended
clearance left side entry
240 mm
minimum
clearance left
side entry
Ï Ï Ï Ï
Ï Ï Ï Ï
Ï Ï
648 mm
minimum front
clearance
1000 mm recommended front clearance
NOTE
If a steel structure is to be used instead of a concrete
base, the dimensions shown in Figure 2-3 can be used to
determine the location of the mounting bolt holes.
Figure 2-3 only shows template and mounting hole
dimensions and clearances, cabinet dimensions are
slightly larger.
Installation & Configuration: Horizon macro outdoor
68P02902W03-A
CONTROLLED INTRODUCTION
Site requirements and considerations
180 mm for optional cable
shroud
1300 mm
OUTDOOR CABINET
Door at second position
(120 )
Door at first position
(90 )
1000 mm recommended
clearance right side entry
240 mm
minimum
clearance right
side entry
Ï Ï Ï Ï
594
Ï Ï Ï Ï
AEH
mm
Ï Ï
604 mm
for optional AEH
Inst. 2–7
Advertisement
Table of Contents
