Table of Contents
Advertisement
BTS architectures and interoperability
M-Cell 6 and
Horizon macro
hardware
equivalents
Table 6-2 shows the RF hardware equivalents for the Horizon macro and M-Cell 6
BTSs.
DCF
DDF
HCU
Feedthrough plate Non-hybrid
TDF
CCB master
CCB extender
SURF
Split Sector Cable Rx Extender
*
Further
configuration
information
Provided the functional guidelines described in this chapter are followed, the
steps involved in upgrading an existing site with mixed equipment are
essentially the same as with a conventional upgrade:
S
S
S
S
Inst. 6–10
Table 6-2 RF hardware equivalents for Horizon macro /M-Cell 6
Horizon macro
900/1800
CBF + duplexer
3- input CBF
duplexer
Hybrid
TBF + duplexer
CCB master
CCB extender
3 x DLNB + IADU
3-input CBF contains only one internal 50 ohm load.
Determine the number of additional carriers required in the upgraded site.
Based on the required site configuration (for example, 4/4/4), use the
functional guidelines provided in this chapter to decide the most effective
hardware configuration for the additional cabinet(s).
Special upgrade kits are available for specified configurations.
Configuration diagrams and product ordering help are available from the
Motorola local office.
Installation & Configuration: Horizon macro outdoor
68P02902W03-A
CONTROLLED INTRODUCTION
M-Cell 900
Hybrid + duplexer
*
+
2 x hybrid + dup/BPF
Hybrid
(no equivalent)
2 x dup/BPF
CCB master
CCB extender
3 x LNA
(no equivalent)
GSM-204-423
M-Cell 1800
31st Oct 01
Advertisement
Table of Contents
