Table of Contents
Advertisement
Site requirements and considerations
Site requirements and considerations
Overview of
requirements
The base site area, where the equipment is to be installed, must meet:
S
S
Outdoor cabinet
dimensions
The dimensions of cabinets are shown in Table 2-2.
Horizon macro outdoor cabinet
Horizon macro auxiliary equipment housing
Cabinet weights
The cabinet weights are shown in Table 2-3.
BTS cabinet with six transceivers
Torque values
Use the torque values listed in Table 2-4 during installation (see NOTE for M12).
Inst. 2–2
Structural requirements including:
–
Space for all conditions, including maintenance, expansion and
associated cables.
–
Allowance for cabinet height.
–
Allowance for weight, including that for potential additions on
expansion.
–
Additional space to allow doors to be fully opened to 120 degrees.
Environmental and power requirements, as defined in manual
specifications.
Table 2-2 Cabinet dimensions
Cabinet type
Table 2-3 Outdoor cabinet weights
360 kg
Table 2-4 Torque values for all cabinet screws/bolts or RF connectors
Screw/bolt size
M4
Torque value (Nm)
2.2
NOTE
The setting of torque value for M12 anchor screws/bolts
depends on local supplies. Refer to the manufacturer's
data for correct values.
Installation & Configuration: Horizon macro outdoor
68P02902W03-A
CONTROLLED INTRODUCTION
Height
1364 mm 1300 mm 594 mm
1364 mm 604mm
Auxiliary equipment housing empty
/ 16 batteries fitted
110 kg / 500 kg
M6
M8
M10
SMA
3.4
5
10
GSM-204-423
Width
Depth
594 mm
N-type
7/16
1
3.4
25
31st Oct 01
Advertisement
Table of Contents
