Backup Identification Step - 3Com 3C15500 - Network Director User Manual

782 C 19: B
HAPTER ACKING
U D C
P EVICE ONFIGURATIONS
Figure 426 Specify Telnet Login Information Step
If this step is displayed, you will need to provide the Telnet username and
password for the device you have selected to backup.
Username — specifies the username used to log in to the selected
devices, via Telnet. This can be a maximum of 32 characters.
Password — specifies the password used to log in to the selected
devices, via Telnet. This can be a maximum of 24 characters.
The username and password may be left blank.

Backup Identification Step

You can manage your device configuration backups by labelling your
backups and providing comments for them as shown in Figure 427.