Reports Dialog Box - 3Com 3C15500 - Network Director User Manual

458 C 11: C
HAPTER REATING

Reports Dialog Box

R
EPORTS
This report is identical to the standard capacity report except it is filtered
to exclude ports that are not above a certain speed.
There are two versions of the report:
Lists free ports capable of speeds over 10Mbps (100Mbps or more)
Lists free ports capable of speeds over 100Mbps (1000Mbps or more)
The report lists the following details for each device:
IP address
Device type
Total number of ports on the device
Total number of free ports on the device.
Devices that do not have any ports of the appropriate speed available are
not included in the report. If 3Com Network Director could not obtain the
speed of the ports on a switch they will not be included in this report. For
reasons why this could occur, refer to the capacity report section.
The Reports dialog box displays a list of all the types of reports that you
can generate using 3Com Network Director as shown in Figure 233: