Extending Your Vlans To Include New Inter-Switch Links - 3Com 3C15500 - Network Director User Manual

Components 565
After:
Figure 307 Network After
If the inter-switch links between this switch and the nearest Layer 3
switch do not have VLAN accounts configured, the next wizard stage will
show the additional ports that need to be configured to achieve this.

Extending your VLANs to include new inter-switch links

This section describes the situation where you wish to extend your
existing VLANs to include one or more new inter-switch links. For
example, you have VLANs with IDs 2-6, 10-12 configured on all of your
inter-switch links. You wish to add a new switch to your network and you
therefore have to configure all of these VLANs on the link connecting this
switch to the network. In the network shown in Figure 308 the new
switch is 140.204.232.79. First, you would select the link on which you
wish to configure the VLANs and then launch the Edit Port VLAN
Membership wizard.