3Com 3C15500 - Network Director User Manual page 702

698 C 17: U 3C N D O A M -S N
HAPTER SING OM ETWORK IRECTOR N ULTI ITE ETWORK
Figure 369 Retry/Timeout Tab
By default all subnets will inherit their settings from the Tools > Options
dialog box. In order to change the number of retries and timeout periods
for a subnet you will need to uncheck the Use defaults from Tools >
Options dialog box option, after which you can set the number of retries
and timeout periods for the subnet.
If you choose to override the settings configured at the whole map level
for a particular subnet then you must configure appropriate settings for
all of the request types listed for the subnet.
Numbers of retries and timeout periods can be configured for
undiscovered subnets in this manner too. The settings configured for an
undiscovered subnet will be used if the subnet is subsequently discovered
either by double-clicking the subnet or by selecting the subnet and
selecting Tools > Network Discovery.