3Com 3C15500 - Network Director User Manual page 441

This dialog box presents a list of the interfaces available on the device,
allowing you to choose the interface which you want to view the
associated data for.
Whenever it can, 3Com Network Director will pre-select the interface in
the list associated with your selection on the 3Com Network Director
map. If you wish to change the selected interface, or customize the data
shown in the RMONView window, you can do so using the above dialog
box before clicking OK.
Update Rate
Determines how frequently the selected device will be polled for RMON
Host data. The rate can be specified in multiples of 10 seconds. For
example, specifying an update rate of 6 indicates an update rate of every
60 seconds (i.e. 1 minute).
Community String
The Community field is initialized to the read/write community string
specified for the device in the 3Com Network Director Properties dialog
box. See "Viewing Device Details"
Clicking Edit launches the Edit Community dialog box, which allows you
to specify an alternative community string to be used to retrieve RMON
data from the selected device.
View
The selected View determines the data that will be displayed when the
RMONView window is launched. Clicking on Edit/Create View allows you
to select what data will be displayed in the view. The supplied predefined
views are:
Table 76 Predefined Views
Predefined View
All
Byte
Error
Multicast
on page 229.
Definition
All items in the RMON host group
Octets transmitted to and from each
host seen by the device
Error packets transmitted from each
host seen by the device
Broadcast and multicast packets
transmitted from each host seen by
the device
Components 437