3Com 3C15500 - Network Director User Manual page 611

Figure 332 Port Security Panel
The settings for each of the port security parameters will only be applied
as part of the configuration template if the associated checkbox is
checked. In addition the Port Security feature places restrictions on the
values which can be set for the following parameters.
Table 95 Port Security Parameter Restrictions
Parameter
Secure Mode
Intrusion Action
Number of
Authorized
Addresses
Restriction
The secure mode of operation can be: no security,
continuous learning, automatic-learning, full security,
network login, network login (secure), or network login
(with NBX).
The action to be taken by the device when an
unauthorized attempt is made to access the network
through the port can be: no action, disable port, or disable
port temporarily (20 seconds). The value for this parameter
can only be set when the secure mode is set to a value
other than No security.
The number of addresses that are authorized to access the
network through this port must be in the range 1-5. The
value for this parameter can only be set when the secure
mode is set to either automatic-learning or continuous
learning.
Components 607