3Com 3C15500 - Network Director User Manual page 453

Components 449
Figure 231 Manage RMON Tables Dialog Box
The dialog box lists all interfaces on the target device. Selecting an
interface allows you to see which RMON tables exist on that interface. If
the checkbox is clear, no RMON table of that type exists on the interface.
You can create new tables or delete the existing tables on an interface by
selecting, ticking or clearing respectively one or more of the checkboxes
and clicking the Apply button. The table or tables will be created or
deleted on the specified interface.
The SNMP community string used by default is indicated in the
Community: field. This is initialized to the read/write community string
specified in 3Com Network Director for the device. You can change this if
you wish. See "Viewing Device Details" on page 229. Clicking Edit
launches the Edit Community dialog box, which allows you to specify an
alternative community string to be used to configure the RMON tables on
the selected device.