Useful Information And References; Rmon; Rmon Support On Individual 3Com Devices; Rmon Limits On Individual Devices (For Table Creation) - 3Com 3C15500 - Network Director User Manual

452 C 10: R
HAPTER MON
Useful Information
And References

RMON

Key Considerations

The following section provides useful details to do with RMON.
RMON was defined by the user community with the help of the Internet
Engineering Task Force (IETF). It became a proposed standard in 1992 as
RFC 1271 (for Ethernet). RMON then became a draft standard in 1995 as
RFC 1757, effectively making RFC 1271 obsolete.
RFC 2819 is the latest specification for RMON. It redefines RFC 1757 in
SMIv2 format.
HC-RMON is defined in RFC 3273.
All RFC standards documents are available online at the IETF web site:
http://www.ietf.org

RMON Support on individual 3Com devices

For more information about
"Supported Devices"

RMON Limits on individual devices (for table creation)

You should try to delete RMON tables from a device when you no longer
require them. RMON tables take up resources on network devices, and
may affect the device's performance. Be careful not to delete RMON
tables which you have not yourself manually created. 3Com Network
Director creates and uses RMON tables for basic monitoring of the
network - removing these tables will adversely affect this functionality.
To manually delete tables from a device, see
on
page 447.
RMON support on 3Com devices
on page 835.
see
"Managing RMON tables"