Disabled Events Dialog Box - 3Com 3C15500 - Network Director User Manual

350 C 8: T E L
HAPTER HE VENT OG
Before the event is disabled, you must select the devices or links as
appropriate, that the event is to be disabled for:
Only devices and links which generated the selected events: Prevents
events of the selected events' types from being generated for the items
that the selected events were generated for. This is the Default.
All devices and links: Prevents events of the selected events' types from
being generated by any item.
This option not only disables the events for items that are currently in the
map, but also disables them for any items that may be added to the map
in future through network discoveries or manual map changes.

Disabled Events Dialog Box

The disabled events can be viewed and can also be re-enabled by
selecting Settings > Disabled Events. This launches the Disabled Events
dialog box:
Figure 165 Disabled Events Dialog Box
Events can be re-enabled from here for specific items, or for sets of items,
by selecting the appropriate entries in the table and clicking Re-enable.
If you re-enable a disabled event that relies upon a monitor that is
currently disabled then the monitor will be re-enabled automatically.