Add Trusted Ip Address Dialog Box - 3Com 3C15500 - Network Director User Manual

598 C 14: B C
HAPTER ULK ONFIGURATION
If the trusted IP address list is enabled, but does not contain any entry
specifying the IP address of the local management station, with SNMP
access set to Enabled, then the configuration template is considered to be
invalid. Consequently, applying the configuration template to a device
selection will be prevented until the problem is corrected, as this would
otherwise prevent 3Com Network Director from carrying out any further
configuration of the device.
Not all devices support as many trusted IP addresses as the configuration
template allow to be entered. The bulk configuration operation adds
trusted IP addresses to the network devices in the order they are shown in
the list; in the event that not all trusted IP addresses can be added to a
device a warning will be given in the summary report for the operation.

Add Trusted IP Address Dialog Box

Figure 324 Add Trusted IP Address Dialog Box
The Add Trusted IP Address dialog box allows the user to add a new entry
to the list of trusted IP addresses. The access methods for the trusted
address must be specified.
3Com Network Director does not allow the addition of an entry to the
trusted IP address list using an address and subnet mask that is already
present in the list.