Scheduled Discovery Pane - 3Com 3C15500 - Network Director User Manual

124 C 4: D N
HAPTER ISCOVERING THE ETWORK
Discovery Options and Scheduled Discovery Whenever a Network
Discovery is started from the Network Discovery wizard, the settings that
you selected in the Discovery Options pane are stored as the default
discovery options for the subnets selected for discovery.
Subsequent scheduled discoveries will use these settings to restrict the
devices that are added to each subnet appropriately.
If you want to change the discovery options for a subnet without
re-running the Network Discovery wizard for that subnet, select the
subnet in the map, select the Device > Properties menu option to launch
the Properties dialog box for the subnet and then change the settings in
the Discovery options tab.

Scheduled Discovery Pane

This step of the wizard enables you to schedule the discovery process to
be re-run on a regular basis in the future. Note that this does not affect
any other options you have already specified in the wizard for the current
discovery.
Figure 40 Scheduled Discovery Pane
Click Configure Schedule to open the Discovery tab of the dialog box.