Controlling Per-Event Advanced Settings - 3Com 3C15500 - Network Director User Manual

Event System Configuration 355
of the PC that 3Com Network Director is running on to the trap
destination table of that device.
Similarly, if you no longer wish 3Com Network Director to receive traps
from a device that is not in the map then you will need to manually
remove the IP address of the PC that 3Com Network Director is running
on from the trap destination table of that device.
Please refer to the device's user-guide for details of how to do this.

Controlling Per-Event Advanced Settings

To launch the per-event Advanced Settings dialog box for a particular
event type, select an event of that type in the Events dialog box and
select Event > Advanced:
Figure 169 Advanced Settings Dialog Box
By default Use defaults from Settings > Advanced is selected. If you wish
to override the global recurring event handling and event suppression
settings, clear this check box. You can then select the settings required
for these features on this event type.
The settings in the per-event Advanced Settings dialog box apply to all
events of this type logged from this point on, against any item.
It is possible to view or override the Smart Event Analysis settings for
multiple event types at the same time. To do this select a set of events in
the Events window and then select Event > Advanced.