Charge Air Cooler Removal - Polaris RZR PRO XP 2020 Service Manual

ENGINE / COOLING SYSTEM

CHARGE AIR COOLER REMOVAL

1. Remove the exhaust pipe. See Exhaust Pipe
Removal page 3.16.
2. Place a drain pan under the rear of the vehicle and
q
remove both hoses
and allow coolant to drain.
3. Cut the three zip ties retaining the harness
e
two zip ties retaining the harness on the top of the
intake manifold and the two zip ties
harness on the passenger side of the intake manifold.
4. Remove the cargo box.
3.32
going to the charge air cooler
w
, the
r
retaining the
5. Remove three hinge clips
vent line.
6. Disconnect ignition coils
i
TMAP sensor . Move the assembly off to the side.
7. Disconnect the transmission switch, speed sensor
and CPS.
8. Remove the fasteners
manifold to the transmission.
9. Remove the two fasteners
the intake manifold.
9930583 R02 - 2020 RZR PRO XP / XP 4 Service Manual
t
from the transmission
y u
, fuel injectors and
o
retaining the intake
a
retaining the fuel rail to
© Copyright Polaris Industries Inc.