Polaris RZR PRO XP 2020 Service Manual page 366

FINAL DRIVE
4. Remove and inspect the armature plate
t
plate . Refer to AWD Diagnosis for detailed
inspection process.
5. Remove the spring retainer
u
springs from the top of the ring gear.
6. Remove the clutch housing / ring gear, roll cage and
plastic spacer assembly
housing.
8.38
r
and cage
y
and compression
i
from the gearcase
7. Remove the RH output hub assembly
gearcase housing.
a
8. Remove pinion seal
pinion gear assembly
Inspect and clean the gearcase housing and replace
all oil seals and O-rings.
9. Inspect the pinion gear for chipped, broken or missing
teeth. Inspect the pinion bearing for signs of wear and
the pinion shaft seal surface for pitting.
9930583 R02 - 2020 RZR PRO XP / XP 4 Service Manual
o
from the
s
, internal retaining ring
d
from the gearcase housing.
© Copyright Polaris Industries Inc.
, and