Polaris RZR PRO XP 2020 Service Manual page 183

INSTALLATION
w
1. Install new seal into crankcase. Thread the drive
bolt of special tool PU-52493
IMPORTANT
The orientation of the seal is critical. Install the seal with
the flat side of the seal facing out as shown.
9930583 R02 - 2020 RZR PRO XP / XP 4 Service Manual
© Copyright Polaris Industries Inc.
2. Tighten the drive bolt
q
into the crankshaft.
3. Once the seal is properly installed, loosen the drive
4. Refer to PVT Inner Cover Assembly page
5. Test drive the vehicle and recheck for leaks before
ENGINE / COOLING SYSTEM
e
until the cylinder
out against the crankcase.
e
bolt and remove special tool PU-52493 from the
crankshaft.
putting back into service.
r
bottoms
3
.
3.45