Fuel Pump Replacement - Polaris RZR PRO XP 2020 Service Manual

EFI / FUEL SYSTEM

FUEL PUMP REPLACEMENT

1. Move the vehicle to a well ventilated area. Shift the
transmission into Park and turn the ignition key off.
2. Remove both seats.
3. Remove upper and lower rear close off panels.
4. Disconnect fuel pump electrical harness.
5. Ensure that static has been discharged by touching a
ground source such as the engine or frame.
5.26
6. While holding a shop towel over the fuel line
connector, disconnect the fuel supply line
pump.
It is possible for pressurized fuel to be present when
disconnecting the fuel line.
It is recommended to allow the vehicle to sit for a period
of one hour after shutting off the engine before
servicing the fuel pump. This allows the exhaust to cool
and fuel pressure to drop.
NOTICE
A small amount of fuel may come out of the fuel lines or
pump fitting. Properly drain fuel into a suitable
container.
9930583 R02 - 2020 RZR PRO XP / XP 4 Service Manual
q
from the
CAUTION
© Copyright Polaris Industries Inc.