Crankcase Inspection - Polaris RZR PRO XP 2020 Service Manual

ENGINE / COOLING SYSTEM
Service Limit
Standard
Main
Bearing
Service Limit
Standard
Connecting
Rod Bearing
Service Limit
Standard
Main
Bearing
Service Limit
Standard
Connecting
Rod Bearing
Service Limit
12. Whether installing a new crankshaft or re-installing
the original, refer to the bearing selection chart
provided in the Connecting Rod Bearing Selection
page 3.79 and Crankshaft Main Bearing Selection
page 3.80 procedures.
3.72
1.7704" (44.968 mm)
B
1.6137 - 1.6140"
(40.988 - 40.995 mm)
1.6129" (40.970 mm)
1.7718 - 1.7720"
(45.003 - 45.010 mm)
1.7707" (44.976 mm)
C
1.6134 - 1.6137"
(40.980 - 40.987 mm)
1.6129" (40.970 mm)
1.7721 - 1.7724"
(45.011 - 45.019 mm)
1.7710" (44.984 mm)

CRANKCASE INSPECTION

1. Remove the oil drain diverter
crankcase.
2. Remove all traces of crankcase sealer from the
crankcase mating surfaces. Inspect the surfaces
closely for nicks, burrs or damage.
3. Be sure alignment pins are in place where used.
4. Be sure oil passages are clean and free of any
cleaning solvent.
9930583 R02 - 2020 RZR PRO XP / XP 4 Service Manual
q
from the upper
© Copyright Polaris Industries Inc.