Polaris RZR PRO XP 2020 Service Manual page 364

FINAL DRIVE
9. Remove four rear bolts
main frame.
10. Remove front sub frame.
11. Remove roll pin from front driveshaft.
12. Remove upper control arm front bolt and pry A arm
up to remove front diff mounting bolt
13. Remove gearcase fasteners
from vehicle. Discard fasteners.
8.36
y
from front sub frame to
u
.
i
and remove gearcase
INSTALLATION
1. Reverse removal procedure for front gearcase
installation.
TORQUE
Front Gearcase Mounting Fasteners:
52 ft-lbs (70 Nm) + 270°
TORQUE
Control Arm Fasteners:
74 ft-lbs (100 Nm)
TORQUE
Sub Frame Mounting Fasteners (Rear):
148 ft-lbs (200 Nm)
TORQUE
Sub Frame Mounting Fasteners (Front):
33 ft-lbs (45 Nm)
TORQUE
Tie Rod End Nut:
30 ft-lbs (40 Nm) + 90°
TORQUE
Ball Joint Fasteners:
44 ft-lbs (60 Nm)
TORQUE
Wheel Hub Castle Nut:
180 ft-lbs (244 Nm)
TORQUE
Front Caliper Mounting Bolts:
33 ft-lbs (45 Nm)
TORQUE
Front Bumper Mounting Fasteners:
30 ft-lbs (40 Nm)
TORQUE
Front Bumper Cover Mounting Fasteners:
7 ft-lbs (10 Nm)
9930583 R02 - 2020 RZR PRO XP / XP 4 Service Manual
© Copyright Polaris Industries Inc.