Additional Swivel Cabinet - Dräger 8000 IC Operating Instructions Manual

Preparation
Additional swivel cabinet (option)
To install a swivel cabinet:
Push hex cap screw up through cabinet from below
and tighten to mounting bracket on incubator.
Insert extra drawer organizers.
WARNING !
Keep space above the incubator clear of
obstruction!
Nothing must be kept below the stroge
cabinets. Hoses, circuits, and cables must be
long enough for the height of the incubator
being adjusted. They must be routed in a way
that no kinking, disconnection or squeezing
can occure.
Note: When using electrical equipment, such as puls
oximeters or Laptop Computers with the
Incubator 8000 IC always verfy that the devices
fulfill the leakage current requirements.
If neccessary use an medical isolation transformer
to linit the leakage current.
Check with the Biomed Department in your hospi-
tal or call Drager Service.
30

Additional Swivel cabinet