Oxygen Control - Dräger 8000 IC Operating Instructions Manual

What's What
Oxygen Control Module
4.1 On/off button for the oxygen control.
4.2 Unlocking key, extends the range of oxygen set
concentration up to 75 % FiO
4.3 Yellow LED >40 % FiO
is iluminated when set range was extended.
4.4 Yellow LED Cal.;
flashes when calibration should be performed.
4.5 Green LED Control;
is iluminated when oxygen control is switched on.
4.6 Display of the current measured value of FiO
4.7 Display of the FiO set value;
2
left arrow down: will reduce the set value
right arrow up: will increase the set value.
4.8 Red LED ±5 % FiO
;
2
flashes when the measured value of FiO
more than 5 % from the set value.
4.9 Red LED Sensor;
flashes when the sensor is defective, the module
swivelt out or not conected is.
4.10 Calibration button for the O
20
.
2
;
2
2.
deviated
2
-Sensors.
2
Oxygen Control Module
VOL.%O
2
4.6
Vol.%
O
2
Vol.%O
4.7 2
4.8
± 5 Vol.%
Cal.
21%
Sensor
4.8 4.10
4.5
Control
Cal. 4.4
>40%
4.3
>40% 4.2
4.1
Control