Preparation
Hood
To open the hood
Tilt the hood back as far as it will go.
Note: Do not let the hood fall back to the normal
position on the incubator base by itself. This may
damage the incubator and the hood.
Open up Double Walls
e.g. to clean the hood or remove them
open front door.
1 open upper clamp and fold up inner wall.
to put the inner wall back in operating position fold up
the panel and push against the clamp.
Mattress
To pull out the mattress
2 open front door
3 pull out strecher with mattress as far as it goes.
24
Hood
Open up Double Walls
Mattress
1
3
2