Mounting Accessories
Mounting Accessories
Ventilator circuit support arm
•
Fold down front door.
Raise bed and lift out of incubator.
Push mattress slightly to one side.
Push hose support into appropriate hole, right or left.
Screw on knurled screws from below and tighten.
Instrument tray
(for small items)
Attach tray to hand rail and tighten.
Observe load limit of 4 lbs (2 kg).
Mounting plate
Monitor and ventilator support with latching system for
standard Dräger RS enclosure, e. g. Babylog 8000.
CAUTION !
Maximum load on RS mounting plate must not
exceed 55 lbs (25 kg).
Attach plate to rail and tighten clamp.
Adjust the support arm that the plate is level.
28
Ventilator circuit support arm
Instrument tray
Mounting plate