Skin Temperature Control Module - Dräger 8000 IC Operating Instructions Manual

Skin Temperature Control
Module

Skin Temperature Control Module

3.1 On/off button for skin temperature control.
3.2 Calibration sign, not applicable in the US.
3.3 Button to display the peripherical skin temperature.
3.4 Green LED Control; is lit when skin temperature
module is switched on.
3.5 Display for actual (measured) value of skin
temperature.
3.6 Display for set value for skin temperature
left key: decreases set value
right key: increases set value
Red LED ±1.0 °C
3.7
flashes/is lit when the measured value of skin
temperature deviates from the set value by more
than 1.0 °C.
3.8 Red LED Sensor
flashes/is lit when the skin temperature sensor is
defective or disconnected.
3.9 Registation sign, not applicable in the US.
3.10 Key for simulating reference temperature of
36 ± 0.1 °C.
°C HAUT/SKIN/PEAU/PIEL
3.5
°C
°C
3.6
3.7
± 1.0 °C
Check
15.22
36 °C
87.06 ±0.1
Sensor
3.8 3.9 3.10
What's What
3.4
Control
3.3
3.2
3.1
Control
19