Humidity Control Module - Dräger 8000 IC Operating Instructions Manual

Humidity Control Module

Humidity Control Module
5.1 On/off button for humidity control.
5.2 Green LED Control;
is iluminated when humidity control is on.
5.3 Display of the current measured value of relative
humidity in %.
5.4 Display of the humidity set value;
left arrow down: decrease the set value
right arrow up: increase the set value.
5.5 Red LED H O;
2
flashes when water supply is empty.
Note: When refilling with cold water the humidity level
in the incubator will decrease for a limited time.
After the water is heated up again by the humi-
dification system, the humidity inside the incu-
bator hood will increase again to set value.
5.6 Red LED Sensor;
lights up when the humidity sensor is defective.
What's What
5.2
% FEUCHTE/HUMID.
5.3
%
%
5.4
5.5
H O
2
Control
5.6
Sensor
5.1
Control
21