Trendellenburg Position; Port Holes Doors; Repositioning Bed Endboard - Dräger 8000 IC Operating Instructions Manual

Trendellenburg Position

Port Hole Doors

Repositioning Bed Endboard

Trendellenburg Position
Turn left hand wheel to raise the left side of the
mattress for Trendelenburg position.
Turn right hand wheel to raise the right side of the
mattress for reverse Trendelenburg position.
Adjust the mattress to the desired position.
Port Hole Doors
To open a port hole door
1 press the outer part of the notch down and the port
hole door will swing open.
To close a port hole door
press door gently back until it snaps in with a click.
Repositioning Bed Endboard
Board may be used at right or left end of bed, as
required.
Squeeze catches with thumb and index finger and
open the front door.
2 Push middle of endboard outwards until released from
its groove, and
reposition on other end of bed.
Cover mattress with clean sheet and place on bed.
Close front door. Red marks on door catches should
no longer be visible indicating that the catches are
fully engaged.
1
1 2
Preparation
1
25